How to change the oil engine and oil filter on an Oldsmobile Cutlass Ciera from 1990-1996

How to change the oil engine and oil filter on an Oldsmobile Cutlass Ciera from 1990-1996

Find out now how to replace the oil engine and oil filter on Oldsmobile Cutlass Ciera from 1990, 1991, 1992, 1993, 1994, 1995 and 1996How to change the oil engine and oil filter on an Oldsmobile Cutlass Ciera from 1990-1996

Replacement of the oil filter and engine oil should be done according to your car’s owner manual. This change protects the engine of your car.

Get ready to start

Make sure that you have a drain pan for the used oil, a funnel, sockets and the right type of oil and oil filter, according to the owner’s manual. You should wear gloves and eye protection glasses.

Replace the engine oil

  1. Open the hood and secure it in a raised position.
  2. Locate the oil drain plug underneath your Cutlass Ciera. Is located in the front side of your car.
  3. Put a drain pan under the oil drain plug.
  4. Loosen the oil drain plug.
  5. Use your hands to remove the oil drain plug and let the oil to drain. It should be drained completely.
  6. Wipe off the traces of oil from the oil drain and oil drain plug.
  7. Insert the plug back on. Do not force it, but don’t let it too loosen also.

oil filter location cutlass ciera

Replace the oil filter

  1. Locate the oil filter: is located underneath the car, close to the oil drain plug.oil filter location cutlass
  2. Slide the drain pan under the location of the oil filter.
  3. Remove the oil filter. You should turn it on counter clock wise.
  4. Drain the oil from the filter.
  5. Make sure that the O-ringdidn’t come off when you removed the old filter.
  6. Pour a small amount of oil in the new filter.
  7. Install the new oil filter.

 

Replace the engine oil

  1. Locate the oil fill cap.
  2. Remove the oil fill cap.locate oil filter cutlass
  3. Check the owner manual for the right quantity of oil.
  4. Use a funnel to add the new oil. Make sure you don’t pour too much.
  5. Insert the oil fill cap.
  6. Start the engine and check for leakages.
  7. Stop the engine and let it rest for some minutes.
  8. Use the dipstick to check the oil level.

 

Make sure you get ride of the used oil according to the law and having in mind the environment. Check the engine oil often. Insert supplementary oil if needed.

 

Leave a Reply

Your email address will not be published. Required fields are marked *